Modular fan cooling tower ÌÂÃ-27.47.
|
Cooling tower ÌÂÃ-27.47. “VORTEX”
TECHNICAL SPECIFICATIONS COOLING TOWER
NAME OF THE PARAMETER |
MEASURMENTS UNITS |
VALUE |
NAME OF COOLING TOWER |
|
ÌÂÃ-24/27 “VORTEX” |
2ÌÂÃ-24/27 “VORTEX” |
OPERATION CONDITIONS |
PERFORMANCE RANGE OF COOLING TOWER ON WATER |
Ì3/H |
50-100 |
50-200 |
NOMINAL PERFORMANCE COOLING OF TOWER ON WATER |
Ì3/H |
70-90 |
140-180 |
MAXIMUM TEMPERATURE OF THE HEATED WATER AT THE COOLING TOWER INPUT |
°Ñ |
NO MORE THAN 65 |
NO MORE THAN 65 |
DROPLET ENTRAINMENT |
% |
0,007 |
0,007 |
EVAPORATION LOSSES AT DT =10°C AND AIR TEMPERATURE OF 28-30 °Ñ |
% |
1,5 |
1,5 |
PRESSURE OF DISCHARGE PIPE AT THE BASE OF COOLING TOWER |
MCE |
4÷5 |
4÷5 |
COOLING TOWER CONSTRUCTION |
COOLING TOWER TYPE |
|
CONTER-FLOW EXHAUST |
NUMBER OF SECTIONS |
PCS. |
1 |
2 |
COOLING TOWER DIMENSIONS |
Ì |
2,40 Õ 2,70 |
2,40 Õ 5,40 |
SECTION DIMENSIONS |
Ì |
2,40 Õ 2,70 |
2,40 Õ 2,70 |
HEIGHT OF WATER INLET WITHOUT PALLET/ CONSIDERING PALLET |
Ì |
2,463/2,883 |
2,463/2,883 |
OVERALL HEIGHT OF COOLING TOWER WITHOUT PALLET/ CONSIDERING PALLET |
Ì |
3,813/4,233 |
3,813/4,233 |
NUMBER OF CLAMPING SHOULDERS OF WATER INLET |
MM |
1 X 150 |
2 X 150 |
IRRIGATION AREA |
Ì2 |
6,48 |
12,96 |
FAN INSTALLATION |
NUMBER OF FANS |
PCS. |
1 |
2 |
INSTALLATION TYPE |
|
AXIAL |
CONNECTION TYPE OF MOTOR AND FAN |
|
DIRECT DRIVE |
FAN DIAMETER |
MM |
1500 |
1500 |
ROTATION RATE |
R/MIN. |
750 |
750 |
NOMINAL POWER OF ELECTROMOTOR |
kW |
1 Õ 7,5 |
2 Õ 7,5 |
ELECTROMOTOR PARAMETERS |
|
380/3/50 |
380/3/50 |
ELECTROMOTOR PROTECTION |
|
IP55, F |
IP55, F |
|
|