COLING TOWER GMV – 20 “MINI”
|
COOLING TOWER GMV – 20 “MINI”
It is designed to cool the water in the circulating water supply systems of compressor stations, cooling installations, air conditioning systems, other equipment and technological processes, in which the heat must be removed by means of cooling water.
Basic technical data
| No. |
Name of the parameter |
20 «MINI» |
|
1 |
Allowable hydraulic load, m³ / h |
|
|
|
- minimal |
12 |
|
|
- nominal |
16 |
|
|
- maximal |
20 |
|
2 |
The recommended water pressure before the cooling tower, MCE |
3 – 6 |
|
3 |
Water temperature difference, °C |
5 – 15 |
|
4 |
Thermal load, Megacalories/h (kW) |
No more than 80 |
|
5 |
Droplet Entrainment, % |
No more than 0.01 |
|
6 |
The type spray tube jets |
Dek C1 |
|
7 |
Axial Fan  06-300 |
N 8 |
|
8 |
Electromotor Power, êW |
0,75 – 1.1 |
|
9 |
The noise level at a distance of 10 m, Db |
No more than 70 |
|
10 |
Size dimensions (length x wide x height), mm |
196012302140 |
|
11 |
Allowable temperature of the water at the cooling tower input, °Ñ |
No more than 65 |
|
12 |
Capacity of the receiving tank, m³ |
0,45 |
|
13 |
Branch pipe of water supply ( Dó 1 ), mm |
65 |
|
14 |
Overflow ( Dó 2), mm |
20 |
|
15 |
Spill pipe ( Dó 3 ), mm |
100 |
|
16 |
Weight without water,kg |
385 |
|
17 |
Weight with water, kg |
885 |
|
The heated water is supplied to the nozzles, which spray it evenly over the surface of the irrigator; after that, going from top to bottom, it is cooled by cross air flow that is created by a fan, and is collected in the receiving tank.
Drops of water, which are carried away by the flow of air, are collected by water catchers and shed to the receiving tank. |
 |
Construction characteristics
The polymeric irrigator provides the intensive cooling of water at a low aerodynamic drag, is not clogged, resistant to low temperatures, the life service - up to 15 years.
The internal and external metal surfaces of cooling tower are treated with anticorrosive coating based on organic resins and natural oils with special additives. Due to its high flow ability and wetting ability the tool displaces moisture and air from the micropores of the material and creates a slick that protects the surface from the electrolyte and even under-slick corrosion.
The fan is placed out of zone of hot and humid air. Having the low weight and a very low droplet entrainment, the cooling tower can be installed on rooftops.
COOLING TOWER GMV – 20 «MINI» dimension sizes
COOLING TOWER GMV– 20 «MINI» installation sizes
|
 |
